Name:variable axial piston pump
Model NO:28 40 56 71 90 125 145 175 210 280
Pump Type:PISTON PUMP
Displacement: 28cc~280cc
Place of Origin:Zhejiang, China
Power:Hydraulic Packaging & Delivery
Working pressure range:280bar~420bar
control mode:Pressure flow control
Materi
Minimum Order:
Supply Ability:
Name:variable axial piston pump
Model NO:28 40 56 71 90 125 145 175 210 280
Pump Type:PISTON PUMP
Displacement: 28cc~280cc
Place of Origin:Zhejiang, China
Power:Hydraulic Packaging & Delivery
Working pressure range:280bar~420bar
control mode:Pressure Flow control
Material:cast iron
Operating mode:closed circuit
Warranty:1 Year
A4VG rexroth series equivalent high pressure axial variable hydraulic piston pumps
Rexroth series A4VG28, 40, 56, 71, 90, 125, 180 hydraulic piston pump
All of HYLEMAN products are completely equivalent and interchangable with the original.
Features
1. Variable pump with axial piston rotary group in swash plate design for hydrostatic drives in open circuit.
2. The flow is proportional to the drive speed and displacement.
3. The flow can be infinitely varied by adjusting the swash plate angle.
4. 2 drain ports
5. Excellent suction performance
6. Low noise level
7. Long service life
8. Favorable power/weight ratio
9. Versatile controller range
11. Short control time
12. The through drive is suitable for adding Gear Pumps and axial piston pumps up to the same size, i.e., 100% through drive.
13. Suitable for operation with mineral oil and HF hydraulic fluids.
The A4VG axial piston variable pump in swash plate design for hydrostatic closed circuit transmissions
- Flow is proportional to drive speed and displacement and is infinitely variable
- Output flow increases with the swivel angle of the swash plate from 0 to its maximum value
- Flow direction changes smoothly when the swash plate is moved through the neutral position
- A wide range of highly adaptable control devices is available for different control and regulating functions
- The pump is equipped with two pressure-relief valves on the high pressure ports to protect the hydrostatic transmission (pump and motor) from overload
- The high-pressure relief valves also function as boost valves
- The integrated boost pump acts as a feed and control oil pump
- The maximum boost pressure is limited by a built-in boost pressure relief valve
- The integral pressure cut-off is standard
Technical Data
Table of values (theoretical values, without efficiency and tolerances; values rounded)
Size | A4VG40 | A4VG56 | A4VG71 | A4VG90 | A4VG125 | A4VG180 | A4VG250 | ||
Displacement variable pump | Vg max | cm3 | 40 | 56 | 71 | 90 | 125 | 180 | 250 |
boost pump (20 bar) | Vg Sp | cm3 | 8.6 | 11.6 | 19.6 | 19.6 | 28.3 | 39.8 | 52.5 |
Speed maximum Vg max | conti. | rpm | 4000 | 3600 | 3300 | 3050 | 2850 | 2500 | 2400 |
limited maximum | limited | rpm | 4200 | 3900 | 3600 | 3300 | 3250 | 2900 | 2600 |
intermittent max. | Min. | rpm | 5000 | 4500 | 4100 | 3800 | 3450 | 3000 | 2700 |
nmin | rpm | 500 | 500 | 500 | 500 | 500 | 500 | 500 | |
Flow continuous and Vg max | l/min | 160 | 202 | 234 | 275 | 356 | 450 | 600 | |
Power continuous Vg max | 400 bar | kW | 107 | 134 | 156 | 183 | 237 | 300 | 400 |
Torque at Vg max | 400 bar | Nm | 255 | 356 | 451 | 572 | 795 | 1144 | 1590 |
100 bar | Nm | 63.5 | 89 | 112.8 | 143 | 198.8 | 286 | 398 | |
Moment of inertia | JGR | kgm2 | 0.0038 | 0.0066 | 0.0097 | 0.0149 | 0.0232 | 0.0444 | 0.0983 |
Angular acceleration | α | rad/s2 | 30000 | 24000 | 21000 | 18000 | 14000 | 11000 | 6700 |
Filling capacity | V | L | 1.1 | 1.5 | 1.3 | 1.5 | 2.1 | 3.1 | 6.3 |
Weight approx. | m | kg | 31 | 38 | 50 | 60 | 80 | 101 | 156 |
PROVIDING EXCELLENT SOLUTIONS BY SAIVS™
Speak to one of our experts today to learn more about our products solutions.