HOME > Saivs brand > hydraulic pump
PVQ-1X series Rexroth Vane Pump
Model:PVQ-1X
Name: hydraulic pump
Pump Type: Vane Pump
SIZE: 018~193
Place of Origin:Zhejiang, China
Power:Hydraulic Packaging & Delivery
Material:aluminium
Warranty:1 Year &
Minimum Order:
Supply Ability:
Model:PVQ-1X
Name: hydraulic pump
Pump Type: Vane Pump
SIZE: 018~193
Place of Origin:Zhejiang, China
Power:Hydraulic Packaging & Delivery
Material:aluminium
Warranty:1 Year
Minimum Order：1 Pieces
Supply Ability：1500 Piece/ Month
Frame size | 1 | 2 | 4 | 5 | |||||||||||||||||||
Size | 18 | 27 | 27 | 27 | 46 | 40 | 45 | 55 | 60 | 68 | 69 | 82 | 98 | 113 | 122 | 139 | 154 | 162 | 183 | 193 | |||
Component series | 1X | ||||||||||||||||||||||
Mounting type | Flange mounting according to SAE J744 | ||||||||||||||||||||||
Line connections | SAE flange design (mounting thread: UNC) | ||||||||||||||||||||||
Installation position | Any, inlet port at top preferred | ||||||||||||||||||||||
Shaft load | Radial and axial forces cannot be transmitted | ||||||||||||||||||||||
Direction of rotation | Drive direction of rotation clockwise or counterclockwise | ||||||||||||||||||||||
Drive | Direct, coaxial drive | ||||||||||||||||||||||
Drive speed 1) 2) | n |
rpm | 600 ... 2,700 | 600 ... 2,500 | 600 ... 2,400 | 600 ... 2,200 | |||||||||||||||||
Displacement | Vg |
cm³ | 18 | 27.4 | 36.4 | 39.5 | 45.9 | 40.1 | 45.4 | 55.2 | 60 | 67.5 | 69 | 81.6 | 97.7 | 112.7 | 121.6 | 138.6 | 153.5 | 162.2 | 183.4 | 193.4 | |
Drive power 3) | Pmax |
kW | 1.1 | 1.5 | 2.2 | 3 | 4 | 5.5 | 7.5 | 11 | |||||||||||||
Flow, max. 4) | qV |
l/min | 26 | 39 | 53 | 59 | 70 | 59 | 66 | 80 | 89 | 100 | 101 | 120 | 141 | 167 | 177 | 203 | 223 | 234 | 267 | 285 | |
Operating pressure, absolute | Inlet 5) | pmin-max |
bar | 0.83 ... 2.4 6) | 0.83 ... 2.4 | 0.83 ... 2.4 6) | |||||||||||||||||
Outlet | pmax |
bar | 210 | 160 | 140 | 210 | 175 | ||||||||||||||||
Pressure peak | pmax | At most 10 % over the max. permanent output pressure; not longer than 0.5 s | |||||||||||||||||||||
Mass 7) | m |
kg | 12 | 14.8 | 23 | 34 | |||||||||||||||||
| 1) | At 1 bar inlet pressure |
| 2) | If phosphoric acid esters (HFD-R) are used, adm. nmax = 1200 rpm |
| 3) | At Δp ≈ 0 bar, n ≈ 1450 rpm |
| 4) | at n = 1500 rpm, p = 0,7 bar, v = 25 mm2/s |
| 5) | Recommended: 1 ... 1,35 bar |
| 6) | If liquids containing water and phosphoric acid esters are used, at least 0,9 bar |
| 7) | Single pump without through-drive |
Hydraulic fluid
Permissible hydraulic fluid 1) | Mineral oil (HLP) to DIN 51524-2 | |
Hydraulic fluid temperature range 2) | °C | -10 … +70 |
Viscosity range | mm²/s | 13 … 860 |
Maximum admissible degree of contamination of the hydraulic fluid 3) | Class 20/18/15 according to ISO 4406 (c) |
| 1) | For more information and data on the use of other hydraulic fluids please contact us. |
| 2) | Observe the admissible viscosity range! |
| 3) | The cleanliness classes specified for the components must be adhered to in hydraulic systems. Effective filtration prevents faults and simultaneously increases the life cycle of the components. For the selection of the filters, see www.boschrexroth.com/filter. |
For applications outside these parameters, please consult us!
The specified values for the max. drive speed apply to an absolute pressure at the input of 1 bar.
Depending on the absolute pressure at the input, the admissible max. speed must be corrected according to the following diagram.
PROVIDING EXCELLENT SOLUTIONS BY SAIVS™
Speak to one of our experts today to learn more about our products solutions.
